Dish-network 6.3 User Manual download pdf (Page 15)

the remote in TV mode to use the TV, and VCR mode to use the VCR.

LIMITED MODE

You can program your remote control in Limited Mode to keep from

accidentally changing the channel on your TV or VCR. When you use

the remote to control your TV in Limited Mode, you will only be able

to use the POWER, MUTE, and VOLUME buttons to control your

TV. Also, when you use the remote to control your VCR in Limited

Mode, you will only be able to use the POWER and VCR function

buttons. The section Programming Using the Equipment Code Tables

has a step that tells the remote control to go into Limited Mode. Also, a

quick way to put the remote in Limited Mode is on page C-6.

Note: Limited Mode cannot be used with audio amplifiers.

PROGRAMMING USING EQUIPMENT CODE TABLES

You can set up the remote to control other equipment using the

equipment codes listed on page 13 and the modes as shown on page 2.

Instructions Additional Information

1 Turn the equipment on. Use the equipment’s front panel

buttons or its remote control.

2 Find the brand name of the

equipment in the tables

starting on page 13.

If the brand isn’t listed, see

Scanning for Equipment Codes

on page 4.

3 Press and hold the mode

button until all the other

mode buttons light up, and

then let go of the button.

The mode button flashes.

For example, hold the TV mode

button for a TV until all of the

other mode buttons light. When

you let go, TV will flash.

4 For AUX mode only. Press

0 for a second TV, or 1 for

a second VCR, or 2 for a

tuner, or amplifier.

This step is for programming

the kind of equipment that

should be programmed in AUX

mode. If you’re not

programming in AUX mode,

skip to step 5.

6.3 Replacement.book Page 3 Tuesday, November 7, 2006 11:56 AM

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 38 39

Comments to this Manuals

No comments

Dish-network 6.3 User Manual Page 15

Comments to this Manuals

Related products and manuals for Remote control Dish-network 6.3